3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pak 100 l/e pinless header .100 .100 straight, 4-wall physical *rohs = directive 2002/95/ec, restriction of the use of certain hazardous su bstances in electrical and electronic equipment insulation material: glass filled polyester (pbt) flammability: ul 94v-0 color: gray marking: 3m logo, part identification number and orientation triangle ts-0161-12 sheet 1 of 3 ? optional ejector latches ? shrouded to minimize physical an d chemical pin damage ? special holes secure pinless header to back panel ? mounting holes to further secure header to board ? stand-off height allows for one layer wire wrap ? rohs* compliant date modified: february 3, 2005 ul file no.: e68080
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pak 100 l/e pinless header .100 .100 straight, 4-wall table 1 pin quantity part number dimensions a b d 20 6420 1.76 [44.8] 1.605 [40.77] 1.21 [30.7] 26 6426 2.06 [52.4] 1.905 [48.39] 1.51 [38.3] 34 6434 2.46 [62.6] 2.305 [58.55] 1.91 [48.5] 40 6440 2.76 [70.2] 2.605 [66.17] 2.21 [56.1] 50 6450 3.26 [82.9] 3.105 [78.87] 2.71 [68.8] -9200 header with short ejector/latch for 3m sockets without strain relief -9000 header with no ejector/latch -9300 header with long ejector/latch for 3m sockets with strain relief -9400 header with ejector only .424 .010 [10.77] .08 [2.0] note: this ejector is a nickel plated zinc alloy casting. .573 .010 [14.55] .37 ref [9.4] .46 ref [11.7] .42 ref [10.7] 1.11 [28.2] ref 1.01 [25.7] ref 1.11 [28.2] ref ts-0161-12 sheet 2 of 3 .17 [4.3] .100 [2.54] .25 [6.4] section a-a .25 [6.4] .58 [14.7] .72 [18.3] position 1 orientation triangle .38 [9.65] 2x .10 [2.5] .16 [4.1] see note 4 64xx .22 [5.6] .30 [7.6] .21 [5.3] a a 8x ? .031 .002 [.79 ] (see note 1 & 2 ) 2x ? .100 [2.54] (see note 3) position 1 b d .32 [8.1] a see note 1 .100 typ [2.54] .16 [4.06] .08 [2.0]
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? pak 100 l/e pinless header .100 .100 straight, 4-wall table 2 3m part number suffix dimension h -9000 0.86 [21.8] -9200 1.60 [40.6] -9300 1.78 [45.2] -9400 1.70 [43.2] ts-0161-12 sheet 3 of 3 tolerance unless noted .0 .00 .000 inch [mm] [] dimensions for reference only inch .005 .1 .01 64xx-9x00 pin quantity: (see table 1) latch/ejector system 0= no latch/ejectors 2= short, roll pin latch/ejectors (3m part #3505-2 ) 3= long, roll pin latch/ejectors (3m part #3505-3 ) 4= roll pin ejectors (3m part #3505-4) ordering information notes: 1.accepts .025 .001 sq pins. 2.four smaller holes at each end used for retention. 3.accepts rear and front entry mounting hardware: rear entry: #4-24 thread cutting screw 3m part # 3341-5 ( ? .116 [2.95] mounting hole) front entry (prior to installation of latch): #2-56 bolt and nut 3m part # 3341-6 ( ? .106 [2.69] mounting hole) 4.these polarization notches will accomodate 3m polarization keys 3518. ? .106 or .116 typ [2.69] [2.95] (see note 3) .353 typ [8.95] h .100 typ [2.54] .300 [7.62] .025 .001 square [0.64] .580 .010 [14.73] (for flush mounting) .050 [1.27] .100 typ [2.54] backplane pin field recommendations
printed in usa. ? 3m 2005 3 elect r onic solutions d i vision 6801 r i v er place blvd. austin, tx 78726-9000 ww w .3m.com/esd minimum 10% p ost-consumer f iber impo r tant notice all statements, technical info r mation, and r ecommendations r elated to 3m s p r oducts a r e based on info r mation believed to be r eliable, but the accuracy or completeness is not guaranteed. befo r e using this p r oduct, you must evaluate it and dete r mine if it is suitable for your intended application. y ou assume all risks and liability associated with such use. any statements r elated to the p r oduct which a r e not contained in 3m s cur r ent publications, or any contra r y statements contained on your pu r chase o r der shall have no fo r ce or e f fect unless exp r essly ag r eed upon, in writing, by an authorized of?cer of 3m. w arranty; limited remedy; limited liabilit y . this p r oduct will be f r ee f r om defects in material and manufactu r e for a period of 1 year f r om the time of pu r chase. 3m makes no o ther w arranties including , b ut n o t limited to, any implied w arranty of merchan t ability or fitness for a p a r ticular purpose. if this p r oduct is defective within the warranty period stated above, your exclusive r emedy shall be, at 3m s option, to r eplace or r epair the 3m p r oduct or r efund the pu r chase price of the 3m p r oduct. except where p r ohibited b y l a w, 3m will not be lia b le f or a n y indirect , special , incidental or consequential loss or dam a g e arising f r om this 3m p r oduct , rega r dless of the legal theo r y asse r ted .
|